What are the decontamination methods for motor grader accessories

Due to the continuous progress of urbanization construction in China in recent years, the utilization rate of various construction machinery is not improving, and the acceleration of urban development, this has created good conditions for the development and growth of construction machinery leasing companies. Among many construction machinery, the grader should be used more frequently. However, due to long-term use and difficult site conditions, the parts of the grader are also prone to dirt. In order to ensure normal operation, the Grader Needs to be cleaned regularly. Next, the Xiaobian of XCMG's accessories will talk about the methods of decontamination of grader accessories.
1. Oil removal
To remove the oil stain from the parts of the grader, some solid re sprouting solution can be used to add a small amount of emulsifier, and the parts of the grader can be cleaned after heating; The effect will be better if the method of pressure injection is used to remove the dirt. In addition, if aluminum alloy cleaning fluid is used to remove oil stains, it is generally prepared with aluminum alloy cleaning fluid for cleaning due to its high cost.
2. Scale removal
When removing the scale on the iron cast cylinder of the grader, add 2%~3% caustic soda aqueous solution into its cooling system, and then put it out after the grader has been running for 1-2 days, then clean it with clean water, repeat it for about 1 time, and then clean the cooling system with clean water.
3. Carbon deposition removal
If you want to remove the carbon deposits on the grader, you can use metal brushes, shovels and other tools to remove the accumulated soil. However, it should be noted that this method is easy to scratch the surface of parts, so you must be careful.